[ 0.000000] Linux version 2.6.30-V2.06.05u (bryant@localhost.localdomain) (gcc version 4.2.3) #1 Thu Oct 17 10:14:54 CST 2013 [ 0.000000] BCM93383 reference design prom init [ 0.000000] args: 2 0x87000000 [ 0.000000] CPU revision is: 00019070 (MIPS 4KEc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 03e00000 @ 04000000 (usable) [ 0.000000] Wasting 524288 bytes for tracking 16384 unused pages [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00004000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00007e00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00004000 -> 0x00007e00 [ 0.000000] On node 0 totalpages: 15872 [ 0.000000] free_area_init_node: node 0, pgdat 84488e60, node_mem_map 844cb000 [ 0.000000] Normal zone: 124 pages used for memmap [ 0.000000] Normal zone: 15748 pages, LIFO batch:3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 15748 [ 0.000000] Kernel command line: root=/dev/mtdblock3 ro noinitrd console=ttyS0,115200 partoffset=0x01170000 partsize=0x00675000 fptaddr=0x83fffe00 [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:128 [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] console [ttyS0] enabled [ 0.001000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.002000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.022000] Memory: 57940k/63488k available (3522k kernel code, 5472k reserved, 1062k data, 144k init, 0k highmem) [ 0.024000] Calibrating delay loop... 317.44 BogoMIPS (lpj=158720) [ 0.045000] Mount-cache hash table entries: 512 [ 0.073000] net_namespace: 964 bytes [ 0.077000] NET: Registered protocol family 16 [ 0.087000] Added platform devs! [ 0.195000] bio: create slab at 0 [ 0.208000] SCSI subsystem initialized [ 0.214000] usbcore: registered new interface driver usbfs [ 0.218000] usbcore: registered new interface driver hub [ 0.221000] usbcore: registered new device driver usb [ 0.232000] NET: Registered protocol family 8 [ 0.233000] NET: Registered protocol family 20 [ 0.258000] NET: Registered protocol family 2 [ 0.264000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.276000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.284000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.290000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.296000] TCP reno registered [ 0.301000] NET: Registered protocol family 1 [ 0.324000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.330000] squashfs: version 4.0 with LZMA457 ported by BRCM [ 0.339000] NTFS driver 2.1.29 [Flags: R/W]. [ 0.344000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.352000] fuse init (API version 7.11) [ 0.359000] msgmni has been set to 113 [ 0.366000] alg: No test for cipher_null (cipher_null-generic) [ 0.373000] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.381000] alg: No test for digest_null (digest_null-generic) [ 0.388000] alg: No test for compress_null (compress_null-generic) [ 0.408000] alg: No test for stdrng (krng) [ 0.413000] io scheduler noop registered (default) [ 0.440000] Driver 'sd' needs updating - please use bus_type methods [ 0.449000] Driver 'sr' needs updating - please use bus_type methods [ 0.460000] PPP generic driver version 2.4.2 [ 0.469000] PPP BSD Compression module registered [ 0.483000] PPP MPPE Compression module registered [ 0.488000] NET: Registered protocol family 24 [ 0.510000] usbmon: debugfs is not available [ 0.517000] usbcore: registered new interface driver libusual [ 0.523000] Serial: BCM63XX driver $Revision: 1.1.1.1 $ [ 0.528000] ttyS0 at MMIO 0xb4e00520 (irq = 11) is a BCM63XX [ 0.536000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.543000] EHCI-brcm EHCI-brcm.0: Broadcom STB EHCI [ 0.551000] EHCI-brcm EHCI-brcm.0: new USB bus registered, assigned bus number 1 [ 0.590000] EHCI-brcm EHCI-brcm.0: irq 32, io mem 0x12e00000 [ 0.602000] EHCI-brcm EHCI-brcm.0: USB 0.0 started, EHCI 1.00 [ 0.611000] usb usb1: configuration #1 chosen from 1 choice [ 0.619000] hub 1-0:1.0: USB hub found [ 0.623000] hub 1-0:1.0: 2 ports detected [ 0.640000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.649000] Sent banner 844a9624 [ 0.653000] MTD0 bootloader offset 00000000 size 00010000 [ 0.658000] MTD1 image1 offset 00020000 size 007d0000 [ 0.663000] MTD2 image2 offset 00800000 size 007c0000 [ 0.669000] MTD3 linux offset 01170000 size 00690000 [ 0.674000] MTD4 linuxapps offset 01810000 size 005f0000 [ 0.679000] MTD5 permnv offset 00010000 size 00010000 [ 0.684000] MTD6 dhtml offset 01e00000 size 00200000 [ 0.690000] MTD7 dynnv offset 00fc0000 size 00040000 [ 0.695000] Creating 8 MTD partitions on "bcmmtd_device": [ 0.700000] 0x000000000000-0x000000010000 : "bootloader" [ 0.716000] 0x000000020000-0x0000007f0000 : "image1" [ 0.730000] 0x000000800000-0x000000fc0000 : "image2" [ 0.743000] 0x000001170000-0x000001800000 : "linux" [ 0.756000] 0x000001810000-0x000001e00000 : "linuxapps" [ 0.770000] 0x000000010000-0x000000020000 : "permnv" [ 0.784000] 0x000001e00000-0x000002000000 : "dhtml" [ 0.789000] mtd: partition "dhtml" extends beyond the end of device "bcmmtd_device" -- size truncated to 0x1f0000 [ 0.807000] 0x000000fc0000-0x000001000000 : "dynnv" [ 0.821000] Mirror/redirect action on [ 0.825000] u32 classifier [ 0.827000] input device check on [ 0.831000] Actions configured [ 0.835000] Netfilter messages via NETLINK v0.30. [ 0.839000] nf_conntrack version 0.5.0 (992 buckets, 3968 max) [ 0.848000] ctnetlink v0.93: registering with nfnetlink. [ 0.868000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.874000] TCP cubic registered [ 0.878000] Initializing XFRM netlink socket [ 0.883000] NET: Registered protocol family 10 [ 0.922000] IPv6 over IPv4 tunneling driver [ 0.948000] NET: Registered protocol family 17 [ 0.952000] NET: Registered protocol family 15 [ 0.957000] error while creating igmp_snooping proc [ 0.962000] Initializing MCPD Module [ 0.970000] RPC: Registered udp transport module. [ 0.975000] RPC: Registered tcp transport module. [ 0.979000] 802.1Q VLAN Support v1.8 Ben Greear [ 0.986000] All bugs added by David S. Miller [ 1.341000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.349000] Freeing unused kernel memory: 144k freed init started: BusyBox v1.19.3 (2013-10-17 10:15:21 CST) starting pid 196, tty '': '/etc/init.d/rcS' Loading drivers and kernel modules... [ 6.873000] bcm_fpm: module license 'Proprietary' taints kernel. [ 6.879000] Disabling lock debugging due to kernel taint [ 7.162000] fFpmLargestBufferSize: 2048 fFpmSizeShiftBits: 0x8 [ 7.174000] Pool index: 0 pool size: 2048 [ 7.178000] Pool index: 1 pool size: 1024 [ 7.182000] Pool index: 2 pool size: 512 [ 7.186000] Pool index: 3 pool size: 256 [ 7.190000] Lookup table index: 0 pool size: 3 [ 7.194000] Lookup table index: 1 pool size: 2 [ 7.199000] Lookup table index: 2 pool size: 1 [ 7.203000] Lookup table index: 3 pool size: 1 [ 7.208000] Lookup table index: 4 pool size: 0 [ 7.212000] Lookup table index: 5 pool size: 0 [ 7.217000] Lookup table index: 6 pool size: 0 [ 7.221000] Lookup table index: 7 pool size: 0 [ 7.485000] Broadcom BCM3383(32) Ethernet Network Device v0.1 Oct 17 2013 10:15:09 [ 7.581000] eth0: MAC Address: 10:0D:7F:F0:D3:7C [ 7.586000] bcmvenet_module_init done [ 8.374000] Initializing USB Mass Storage driver... [ 8.396000] usbcore: registered new interface driver usb-storage [ 8.413000] USB Mass Storage support registered. Mounting apps partition [ 14.494000] Got MBOX IRQ [ 14.494000] Link is up starting pid 264, tty '': 'lxginit 2> /dev/ttyS0' starting pid 265, tty '': 'smbapp 2> /dev/ttyS0 ' Please press Enter to activate this console. [ 34.550000] eth0: bcmvenet_open [ 34.554000] Sending link up message to app. [ 34.558000] Got MBOX IRQ [ 34.558000] Link is up [ 34.687000] Shutdown task has registered with the Venet driver [ 34.856000] GPL_NetUSB: is loaded! [ 35.052000] GPL NetUSB up! NAS: Network Attached Storage Control Application [Version 1.2 Build Oct 17 2013 10:22:13] SmbApp: 3G enabled? (0) Launching mscapp SmbApp: waiting on port 49182 to recvfrom... MSC: Media Server Control Application [Version 1.2 Build Oct 17 2013 10:22:13] MSC: waiting for data on port UDP 49181 [ 35.814000] NetUSB: is loaded! [ 36.106000] kc 86 : run_telnetDBGDServer start [ 36.112000] kc 223 : init_DebugD end [ 36.116000] INFO1773: NetUSB 1.02.17, 0002061E : Sep 4 2012 15:00:00 [ 36.122000] INFO1775: AUTH ISOC [ 36.125000] INFO1776: MOVE_HEAD filterAudio [ 36.131000] INFO0AAB: --- checkSBusTimeoutThread start --- [ 36.164000] usbcore: registered new interface driver KC NetUSB General Driver [ 36.181000] INFO0076: init proc : PAGE_SIZE 4096 [ 36.186000] INFO1647: infomap c00fc1bc [ 36.190000] INFO164A: sleep to wait eth0 to wake up [ 36.196000] INFO02D0: use dev Name eth0 [ 36.200000] INFO1653: sleep to wait eth0 end. [ 36.204000] INFO166C: UDP_BROAD 7423 tcpPort:625868800 [ 36.215000] INFO02D0: use dev Name eth0 [ 36.251000] INFO1553: tcpConnector() started... [ 39.252000] INFO1430: Bind to eth0 [ 44.934000] eth0: no IPv6 routers present SmbApp: Cmd SendConfig feature 005b SmbApp: Nas Enable SmbApp: Netbios Enable SmbApp: start proftpd SmbApp: 3G enabled? (0) Launching proftpd SmbApp: ApprovedAll Enabled SmbApp: ApprovedOnly Disabled SmbApp: DefaultShareAll Enable set netbios name BRCM-LVG set workgroup name WORKGROUP set admin name admin set admin pass smbapp: sh: /bin/smbpasswd: not found MSC: Received DISABLE command MSC: The server is not running!!!! sh: /bin/smbpasswd: not found MSC: Received ENABLE command SmbApp: Couldnt kill process smbd SmbApp: Couldnt kill process nmbd MSC(MiniDLNA): In child processs, Starting server MSC(MiniDLNA): ERROR!!Enable MiniDLNA Failed! MSC: In Parent process, Started server pid 478 SmbApp: Cmd SendConfig feature 005b SmbApp: No Feature change SmbApp: Cmd SendConfig feature 005b SmbApp: No Feature change smbapp signal SIGALRM starting pid 266, tty '': '/bin/cttyhack /bin/login' (none) login: admin Password: Login incorrect (none) login: